Black & White :

Introduction :
The RPC Polytapes protective films can be used to protect sensitive surface against mechanical damages, dust or durt during transport storage and assembly.

Main Usage :
Outdoor and indoor protection for the following surfaces with low gloss :
1. Stainless Steel
2. Aluminium
3. PVC, PVDF, Polyster, Acrylic, Lacquers and plastics.
4. Ceramics, Marble
5. The film is not suitable for copper and brass.

Technical Data :
Types of the Film                 LDPE

Colour                              Black/White
Thickness                        50 Micron
Elongnation                      >230 %
Tear Strength                    N/30mm = 38mm
Types of Adhesive            Natural Rubber(Solvent based)/Acrylic Dispersion
Adhesive Strength            N/50mm = 5.5-7.5
Outdoor Exposure             Maximum 6 Months

Storage :
The roals can be stored under normal room condition for upto 6 months provided they are protected from direct sunlight heat, dust and humidity.

Disposal :
The RPC Ploytapes LDPE Film cxan be recyled without problems because they do not contain solvents or heave metals. They can be disposed of under the care of the relevant Authoritative regulation and be burned with normal house waist.

Important Note :
The data supplied are taken as average values, prior to usage, the matterial shall be tested with the surface and material to be protective to ensure the suitability of the product for the intended application.
We reserve the right to change product specification without prior notice which may alter the performance.

Address : Plot No. 30, Sector 7, IMT Manesar, Gurugram, Haryana